PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 01 of 05

Locks Studs(TM) High Strength Threadlocker
82174

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name: Locks Studs(TM) High Strength Threadlocker
Item No.: 82174
Product Type: Anaerobic

2. COMPOSITION, INFORMATION ON INGREDIENTS


Ingredients CAS No. %

Polyglycol dimethacrylate 25852-47-5 65-70
Bisphenol A fumarate resin 39382-25-7 20-25
CUMENE HYDROPEROXIDE* 80-15-9 1-3
Poly(ethylene) 9002-88-4 1-3
SACCHARIN 81-07-2 1-3
N,N-Dialkyltoluidines 613-48-9 0.1-1
SILICA, AMORPHOUS, FUMED,
CRYSTALLINE-FREE 112945-52-5 0.1-1

* This component is listed as a SARA Section 313 Toxic Chemical.


Ingredients which have exposure limits

Exposure Limits (TWA) ACGIH OSHA OTHER
Ingredients (TLV) (PEL)

SILICA, AMORPHOUS, FUMED,
CRYSTALLINE-FREE 10 mg/m3 TWA 6 mg/m3 TWA 3 mg/m3 TWA
resp. dust

Exposure Limits (STEL) ACGIH OSHA
Ingredients (TLV) (PEL)


3. HAZARDS IDENTIFICATION

Toxicity: Mild eye irritant.
Oral LD50 more than 10,000 mg/kg.
Dermal LD50 more than 5000 mg/kg.
Primary Routes of Entry: Eyes, skin
Signs and symptoms
of Exposure: May cause dermatitis on prolonged contact in
sensitive individuals
Existing Conditions
Aggravated by Exposure: None known










PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 02 of 05

Product Name: Locks Studs(TM) High Strength Threadlocker
Item No.: 82174

3. HAZARDS IDENTIFICATION (continued)

Literature Referenced Carcinogen
Ingredients Target Organ and Other Health Effects NTP IARC OSHA

Polyglycol dimethacrylate ALG IRR NO NO NO
Bisphenol A fumarate resin ALG IRR NO NO NO
CUMENE HYDROPEROXIDE ALG CNS COR IRR MUT NO NO NO
Poly(ethylene) No Data NO N/A NO
SACCHARIN No Data YES 2B NO
N,N-Dialkyltoluidines No Data NO NO NO
SILICA, AMORPHOUS, FUMED,
CRYSTALLINE-FREE NUI NO N/A NO
-------------------------------------------------------------------------------

Abbreviations

N/A Not Applicable 2B Possibly carcinogenic to humans
ALG Allergen CNS Central nervous system
COR Corrosive IRR Irritant
MUT Mutagen NUI Nuisance dust



4. FIRST AID MEASURES

Ingestion: Do not induce vomiting. Keep individual calm.
Obtain medical attention
Inhalation: Does not apply
Skin Contact: Wash thoroughly with soap and water
Eye Contact: Flush at least 15 minutes with water. Obtain
medical attention.

5. FIRE FIGHTING MEASURES

Flash Point: More than 200F Method: Tag Closed Cup
Recommended
Extinguishing Agents: Carbon dioxide, foam, dry chemical
Hazardous Products formed
by Fire or Thermal Decomp Irritating organic vapors
Unusual Fire or
Explosion Hazards: None

Explosive Limits:
(% by volume in air)Lower Not available
(% by volume in air)Upper Not available











PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 03 of 05

Product Name: Locks Studs(TM) High Strength Threadlocker
Item No.: 82174

6. ACCIDENTAL RELEASE MEASURES

Steps to be taken in case
of spill or leak: Soak up in an inert absorbent. Store in a partly
filled, closed container until disposal.

7. HANDLING AND STORAGE

Safe Storage: Store below 100F
(Contact Loctite Customer Service 1-800-243-4874 for shelf Life information)
Handling: Avoid prolonged skin contact. Keep away from eyes.

8. EXPOSURE CONTROLS, PERSONAL PROTECTION

Eyes: Safety glasses or goggles.
Skin: Neoprene, rubber, or butyl rubber gloves.
Ventilation: Does not apply

See Section 2 for Exposure Limits.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Red liquid
Odor: Mild
Boiling Point: More than 300F
pH: Does not apply
Solubility in Water: Slight
Specific Gravity 1.05 at 80F
Volatile Organic Compound
(EPA Method 24) 13.5%; 141.75 g/l
Vapor Pressure: Less than 5mm at 80F
Vapor Density: Not available
Evaporation Rate
(Ether = 1) Not available

10. STABILITY AND REACTIVITY

Stability: Stable
Hazardous Polymerization: Will not occur
Incompatibility: None
Conditions to Avoid: Not available
Hazardous Decomposition
Products (non-thermal): None

11. TOXICOLOGICAL INFORMATION

See Section 3.










PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 04 of 05

Product Name: Locks Studs(TM) High Strength Threadlocker
Item No.: 82174

12. ECOLOGICAL INFORMATION

No data available

13. DISPOSAL CONSIDERATIONS

Recommended methods of
disposal: Incinerate following EPA and local regulations.
EPA Hazardous Waste
Number NH - Not a RCRA Hazardous Waste Material

14. TRANSPORTATION INFORMATION

DOT (49 CFR 172)
Domestic Ground Transport
Proper Shipping Name: Unrestricted
Hazard Class or
Division: Unrestricted
Identification Number: None
Marine Pollutant: None
IATA
Proper Shipping Name: Unrestricted
Class or Division: Unrestricted
UN or ID Number: None

15. REGULATORY INFORMATION

CA Proposition 65: This product contains Saccharin. No prop65 hazard
warning is necessary if this product is used as
reasonably anticipated.

16. OTHER INFORMATION

Estimated NFPA(R) Code:
Health Hazard: 1
Fire Hazard: 1
Reactivity Hazard: 1
Specific Hazard: Does not apply

Estimated HMIS(R) Code:
Health Hazard: 1
Flammability Hazard: 1
Reactivity Hazards: 1
Personal Protection: See Section 8.

NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.

Prepared By: Stephen Repetto
Title: Research Chemist, Environmental Health & Safety







PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 05 of 05

Product Name: Locks Studs(TM) High Strength Threadlocker
Item No.: 82174

16. OTHER INFORMATION (continued)

Company: Loctite Corp., 1001 Tr Br Cr, Rocky Hill CT 06067
(24hr.) Phone: (860) 571-5100
Revision Date: January 22, 1996 Revision: 0028