RE-LI-ON CORP -- RE-LI-ON, CUTTING AND TAPPING FLUID -- 9150-00N056146
===================== Product Identification ===================== Product ID:RE-LI-ON, CUTTING AND TAPPING FLUID MSDS Date:11/01/1990 FSC:9150 NIIN:00N056146 MSDS Number: BWDPY === Responsible Party === Company Name:RE-LI-ON CORP Address:4334 W CENTRAL AVE City:TOLEDO State:OH ZIP:43515 Country:US Info Phone Num:419-537-9656 Emergency Phone Num:800-424-9300(CHEMTREC) CAGE:0TVL1 === Contractor Identification === Company Name:RE-LI-ON CORP Address:4334 W CENTRAL AVE Box:City:TOLEDO State:OH ZIP:43515 Country:US Phone:419-537-9656 CAGE:0TVL1 ============= Composition/Information on Ingredients ============= Ingred Name:SEVERELY HYDROTREATED NAPHTHENIC DISTILLATE OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:PARAFFINIC DISTILLATE OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:PARAFFIN WAXES AND HYDROCARBON WAXES, CHLORINATED; (CHLORINATED PARAFFIN) CAS:63449-39-8 RTECS #:RV0450000 OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CHLORINATED FATTY ACID OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CORROSION AND STAIN INHIBITOR OSHA PEL:N/K ACGIH TLV:N/K ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYE: CONTACT MAY CAUSE MODERATE IRRITATION. SKIN: PROLONGED OR REPEATED EXPOSURE MAY CAUSE DEFATTING OF SKIN RESULTING IN MODERATE IRRITATION. INHALATION: EXCESSIVE EXPOSURES AT ELEVATED TEMPERATURES MAY CAUSE IRRITATION TO EYES, NOSE, MUCOUS MEMBRANES AND RESPIRATORY SYSTEM. EXCESSIVE EXPOSURES MAY (EFTS OF OVEREXP) Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:HEALTH HAZARDS: ALSO CAUSE DIZZINESS AND OTHER CENTRAL NERVOUS SYSTEM EFFECTS. INGESTION: PRODUCT HAS LOW ORDER OF ACUTE TOXICITY. PULMONARY ASPIRATION HAZARD IF SWALLOWED AND VOMITING OCCURS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. OBTAIN MED ASSIST IF IRRIT PERSISTS. SKIN: WASH WITH SOAP AND WATER UNTIL NO ODOR REMAINS. INHALATION: MOVE PERSON TO FRESH AIR. IF NOT BREATHING, GIVE A RTIFICIAL RESPIRATION AND OBTAIN MEDICAL ASSISTANCE. INGESTION: DO NOT INDUCE VOMITING. DO NOT GIVE LIQUIDS. OBTAIN MED ASSISTANCE. SML AMTS ENTERING MOUTH SHOULD BE RINSED OUT UNTIL NO TASTE REMAINS. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:>300F,>149C Extinguishing Media:USE FOAM, WATER SPRAY (FOG), DRY CHEM CARBON DIOXIDE, VAPORIZING LIQ FOR THIS TYPE OF PROD DEPENDING ON SIZE OR (SUPDAT) Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP . PLAN FIRE PROT & RESPONSE STRATEGY THRU CONSULTATION W/LOC FIRE PROTECTION AUTHORITIES/APPROP SPECIALIST. Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER. ================== Accidental Release Measures ================== Spill Release Procedures:PVNT IGNIT, STOP LEAK, VENT AREA. CONTAIN SPILL BY DIKING/IMPOUNDING. ADD SAND, EARTH, OR OTHER SUITABLE ABSORBENT TO SPILL AREA. KEEP PROD OUT OF SEWERS & WATERWAYS. WEAR NIOSH/MSHA APPRVD RESP PROTE CTION FOR LARGE SPILL, LEAK OR RELEASE. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IN EVENT OF VAPOR CONCENTRATIONS EXCEEDING TIME WEIGHTED EXPOSURE LIMIT USE NIOSH/MSHA APPROVED CARTRIDGE RESPIRATOR OR GAS MASK. Ventilation:USE WITH ADEQUATE VENTILATION. VENTILATE AS NEEDED TO COMPLY WITH EXPOSURE LIMIT. Protective Gloves:IMPERVIOUS GLOVES. Eye Protection:ANSI APPROVED CHEM WORKERS GOGG . Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health VAPOR PRESSURE: LESS THAN ETHER (60F). EXTINGUISHING MEDIA: POTENTIAL SIZE OF FIRE AND CIRCUMSTANCES RELATED TO SITUATION. ================== Physical/Chemical Properties ================== Vapor Pres:SUPP DATA Spec Gravity:0.924 Appearance and Odor:NONE SPECIFIED BY MANUFACTURER. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AND REDUCING AGENTS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE, HYDROGEN CHLORIDE AND OXIDES OF SULFUR. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.