BERNZOMATIC CORP -- MAPP GAS -- 6830-00D020183
===================== Product Identification ===================== Product ID:MAPP GAS MSDS Date:05/30/1990 FSC:6830 NIIN:00D020183 MSDS Number: CCHPV === Responsible Party === Company Name:BERNZOMATIC CORP Address:ONE BERNZOMATIC DRIVE City:MEDINA State:NY ZIP:14103-1648 Country:US Info Phone Num:716-798-4949 Emergency Phone Num:716-798-4949 CAGE:70785 === Contractor Identification === Company Name:BALKAMP INC Address:2601 S HOLT ROAD Box:City:INDIANAPOLIS State:IN ZIP:46241 Country:US Phone:317-244-7241 CAGE:70842 Company Name:BERNZOMATIC CORP Address:ONE BERNZ O MATIC DRIVE Box:City:MEDINA State:NY ZIP:14103-1648 Country:US Phone:716-798-4949 CAGE:70785 Company Name:NAPA, A DIVISION OF LINCOLN AUTOMOTIVE Address:ONE LINCOLN WAY Box:City:ST. LOUIS State:MO ZIP:63120-1578 Country:US Phone:414-255-5520 CAGE:050Q3 ============= Composition/Information on Ingredients ============= Ingred Name:METHYL ACETYLENE (PROPYNE) CAS:74-99-7 RTECS #:UK4250000 Fraction by Wt: 100% Other REC Limits:NONE RECOMMENDED OSHA PEL:1000 PPM ACGIH TLV:1000 PPM; 9394 ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ASPHYXIANT. MAY REDUCE OXYGEN REQUIRED FOR BREATHING. LIQUID GAS MAY FREEZE SKIN. Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT CARCINOGENS. Effects of Overexposure:DIZZINESS TO UNCONSCIOUSNESS IF HIGH CONCENTRATIUONS OF GAS REPLACE OXYGEN FOR BREATHING. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:REMOVE EXPOSED PERSON TO FRESH AIR. UF UNCONSCIOUS, SEEK MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:CC Flash Point:-99F,-73C Lower Limits:3.0 Upper Limits:11.0 Extinguishing Media:ELIMINATE OXYGEN SOURCE OR STOP FLOW OF GAS. USE WATER TO COOL CYLINDER. DRY CHEMICAL OR CARBON DIOXIDE TO REDUCE OXYGEN Fire Fighting Procedures:COOL CYLINDERS WITH WATER. KEEP PERSONNEL AWAY. Unusual Fire/Explosion Hazard:VAPOR IS FLAMMABLE AND HEAVIER THAN AIR AND MAY TRAVEL TO SOURCE OF IGNITION AND FLASHBACK. USE WATER TO KEEP FIRE EXPOSED CONTAINERS COOL TO REDUCE PRESSURE. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE IGNITION SOURCES AND VENTILATE AREA. Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE IN WELL VENTILATED AREA AWAY ROM ALL IGNITION SOURCES. STORE AT TEMPERATURES BELOW 125F. STORE OUT OF DIRECT SUNLIGHT. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED WITH NORMAL USE. Ventilation:LOCAL EXHAUST ADVISABLE WHEN WELDING, OTHERWISE "N/A". Protective Gloves:ADVISABLE WHEN WELDING. Eye Protection:FILTER SHADE #4 OR DARKER FOR WELDING Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:G2 NRC/State Lic Num:NONE Boiling Pt:B.P. Text:-36F,-38C Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN Decomp Temp:Decomp Text:NOT GIVEN Vapor Pres:109 PSIG Vapor Density:1.48 Spec Gravity:.571 Evaporation Rate & Reference:NOT GIVEN Solubility in Water:SLIGHT Appearance and Odor:COLORLESS, UNPLEASANT ODOR AT APPROX. 100 PPM ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES EXTREMELY FLAMMABLE. AVOID UNCONTROLLED CONTACT WITH OXIDIZERSS Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 125F. Hazardous Decomposition Products:NORMAL BY-PRODUCTS OF COMBUSTION. Conditions to Avoid Polymerization:WILL NOT OCCUR. ==================== Disposal Considerations ==================== Waste Disposal Methods:VENT TO ATMOSPHERE IN OUTDOOR AREA FREE OF ALL SOURCES OF IGNITION. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.